DOWNLOAD DATA SHEET
The NI PCI-6289 is a high-accuracy multifunction M Series data acquisition (DAQ) board optimized for 18-bit analog input accuracy. This resolution is equivalent to 5½ digits for DC measurements. To ensure accuracy, the NI-PGIA 2 amplifier technology is optimized for high linearity and fast settling to 18 bits, and programmable lowpass filters reject high-frequency noise and prevent aliasing.
High-accuracy M Series devices feature programmable offsets and references on the analog output channels to obtain maximum 16-bit resolution on any custom signal. They are ideal for applications including device test and characterization and for sensor and signal measurements requiring instrument-class accuracy. Contact NI to order the RoHS-compliant version of the PCI-6289 (P/N 779737-01).
Driver Software
M Series devices work with multiple OSs using three driver software options including NI-DAQmx, NI-DAQmx Base, and the NI Measurement Hardware DDK. Refer to the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.
Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. LabVIEW Full and Professional development systems include LabVIEW SignalExpress for interactive data logging. M Series DAQ devices are compatible with the following versions (or later) of NI application software - LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series DAQ devices are also compatible with Visual Studio .NET, ANSI C/C++, and Visual Basic 6.0.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
- Four 16-bit analog outputs (2.8 MS/s);
48 digital I/O; two 32-bit, 80 MHz counters - Correlated digital I/O (32 clocked lines, 10 MHz); analog and digital triggering
- Programmable 40 kHz lowpass filters
- NI-MCal calibration technology for increased measurement accuracy
- RoHS-compliant version available (P/N 779737-01); call to place order
- NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software
