Wednesday, September 29, 2010

The life-saving.

 The life-saving, or circuit breaker is a protective device having the task of protecting the plant from direct and indirect contacts. Direct contact occurs when you touch parts of a generic system that are normally in tension, such as contact with a terminal non-isolated contact with a conductor, etc., is indirect contact occurs when you are in contact with parts of system that are not normally live, but which may be a potential non-zero due to a failure or breakdown of insulation of electrical equipment, such as the casing of an engine or an electrical appliance. Consider the operation of the differential, referring to fig1.
In it there is a toroidal magnetic core on which they are allocated two windings (coils) connected in series with the line conductors and the coil differential acting on the steering control, without ground fault, which in normal operation, coils are struck by the same current, the flow produced by the latter turns out to be balanced consenguenza will have no magnetic effect and the relay will not intervene. In the presence of a dispersion and then a ground fault is the flow of the two windings unbalanced (the sum is not zero) and the resulting magnetic flux activates the tripping relay. The main characteristics of the 'circuit breaker are: rated voltage (Vn), the rated current (In), the rated residual current of intervention (IDN). Idn values are:

ENERGY STORAGE

The real photovoltaic or other (wind, etc) and CLASSIC use only non-family independent of other conventional energy sources should also include the "Fund storing energy in order to take advantage of the energy produced by the sun even when it fails.
A system of this kind, as written, is absolutely prohibitive in contemporary because of the high costs.
For this reason we will always be dependent on suppliers of electricity even if it has a photovoltaic or wind power, etc., without storage, with regard to the "DARE" and "have".
Give and take means that, if a regular system of alternative energy is not the classic after a long series of checks and overcontrol of every kind (Put on red tape and the various laws and regulations municipal, provincial, regional and state) is also quite expensive to money and time, you could get there (they say .....) well to earn by selling the energy produced in excess of the providers themselves and with a very attractive price per KW (They always say them).
Many entrepreneurs fall into the small size also proposed rewarding undertakings made by the same suppliers and installers of electrical energy using capital also conspicuously perhaps with bank loans very positive for banks.
In my opinion though I do not think that these small entrepreneurs see really small or large profitable gains that can absorb the substantial cost without including interest, expenses and unforeseen damage or other insurance premiums of the complex. Large suppliers instead funded directly by the state, can afford any initiative of their sizes and with a lot less time and witnessed the first entrance, this, yes, really profitable.
Basically, in the end, even the small business non-classical alternative energy, you will always get the bill to pay little or no different from those of the past .-
We hope only that in the short or long term, the State takes very seriously the development of alternative energy, eliminating all the mechanisms of any kind which prevent the development of independent and autonomous mass which can only occur by creating industries competing with each other to decrease very substantial costs.
E 'and above to be taken into account in the "mind" that from January 2011, the various "rates of reimbursement or payment of the energy account by the GSE - Electrical Services Manager', always' s ENEL, the Italian state - through its relevant Ministries, will change these real attractive "prices." In practice, the Italian state will maintain the current rates or change in a negative way? It 's a question that weighs heavily on investment ....
The current situation of incentive systems in Italy is about 37,700 corresponding to a calculated power of 500 MW and will provide certainty with numerous other large power plants. The evolution is very positive and encouraging.
It is rather encouraging for the investigator or the professional craftsman poor that certainly can not compete with midsize and large companies.
Another important fact to note is that the various manufacturers and wholesale dealers of equipment for alternative energy (solar, wind, etc), apply their listings on the face potential "Peak to Peak" and not that of the actual yield real power generated in WAT. Like saying that a car makes 100 hp while in practice makes the half. The fact, for me, is absolutely not "digest".
With the real evolution in progress, let us hope that the performance of photovoltaic panels can be increased to 40 percent and perhaps even more, and the actual cost of a WAT reaches the quota of 0.25 cents. It might be feasible if we continue with the action taken.
Finally, please note that the processing of photovoltaic panels has been done on the site, link STUDIES / Lesson 1 .-

Optimizing computer, computer optimization, acceleration pc, program to optimize computer

 FREE DOWNLOAD
Do you regularly use your computer or laptop to run a well-defined task, to search for information. Do not forget, please, that the PC memory is not unlimited and unnecessary files affect the system work. By the time you might notice that your computer no longer work as before the operation speed decreases, the system errors and failures occur. Where's the problem? How can we improve the performance of your computer or laptop? To speed up your PC and optimize your computer and disk cleanup is necessary to continuously monitor the information does not take up unnecessary space on your hard disk and not slow down the operation of the system.
Obviously it is very convenient store several files and folders on your hard disk, since they are always at hand. Just click the mouse on the file name that pops up and you have all the necessary information before their eyes. But if you do not use these files every day, it would be best to keep the removable disks. This solution is much better for the computer and for you First, the information will not take up too much space on your hard drive, then make your computer faster. Secondly, this information is protected in case of loss of data during computer malfunction.
The next important part is the register. The register collects a wealth of information, not to be used later and negatively affect the functioning of the system. The log is saved all traces of the work, often there are duplicates. Use the software for registry cleaning. Do it as his rule - the weekly cleaning of the register by useless information. This is an important suggestion of ' computer optimization and acceleration pc.
You or your children love the Internet for download free music or games. You know that is an implied threat? There is the chance to download from the Internet, along with free music and games, malicious programs or viruses that occupy the working memory of your computer or laptop. This is also one of the reasons for system malfunction and loss of important data. What can you suggest in this case? We recommend that you install the program 's computer optimization and acceleration pc, which scanerizza entire system from spyware and remove all dangerous files that sticks in the memory of the computer.
The other important aspect of the ' optimize your computer and clean the registry is to scan and search for duplicate files, which are contained in different folders and are not always visible. She lights up the program to get the list of duplicates. You can look at this list and decide whether or not to delete these files. You can also rely on the program, which automatically removes duplicates that are not needed.
It is clear that to speed up your computer the best solution is a specialized program, which scanerizza the system and eliminate all unnecessary information. This program becomes his best help at work, and is designed for operating systems like Windows XP, Windows Vista, Windows 7.

Laptop data recovery

 FREE DOWNLOAD
We must remember that the success of the hard drive data recovery depends on the degree of damage to the hard drive. You can recover lost data if the hard disk is not damaged completely.
In case you have unfortunately deleted some files on the computer working on his farm, to avoid disappointment with the direction, you can download a free program for data recovery and recover the data yourself. Have no fear of failure as to help users have created a detailed manual with detailed examples. The program works for the Windows operating system, Windows XP, Vista, Windows 7. This tool for data recovery is good for the personal computer, both for the laptop.
It is useful to have this program at home, for example because your children may accidentally delete the photos that have value for you or your music collection, which she was collecting for a long time. Or your family forgot to turn off the computer, or use unsafe technology has led to a fault. The problems of data recovery lost resolve more quickly with the use of the program of data recovery laptop.
Please remember that any time you should make backup copies of files, store them on your hard drive or on removable disks, follow the rules of the safe use of the system. If the system stops working, if the laptop were to get the virus, if the hard drive had failed, in these cases is appropriate to use the program for data recovery and data recovery laptop.


The laboratory hybrid hemodynamics: a revolution in cardiac care

What happens when, during an interventional procedure, you need to suddenly change method? This is a potential problem related to the increasing sophistication of transcatheter procedures. The hybrid operating room, integration of the Cath Lab and the operating room significantly reduces the risks associated with an emergency situation, allowing instant switching, for example, by a percutaneous procedure to a surgical procedure. "It's pretty clear that interventional procedures are becoming less invasive and imaging is becoming increasingly important during surgery," said Dr. Darren Walters, director of the Department of Cardiology at the Prince Charles Hospital. "All types of endovascular procedures require, in effect, a hybrid environment. "Dr. Walters believes that the advent of these environments has paved the way for the development of percutaneous valve replacement, and that this is a step forward after interventional cardiology coronary stenting. This is an important component of the revolution of the treatment of heart disease.
These techniques, for example, are leading the way in Australia, the replacement heart valve in elderly patients who were at high risk of surgical procedure in case of replacement, open chest. The data show that the first trial with percutaneous intervention, patients have shorter hospital stays and mortality rates significantly lower. 

Dose reduction in valve replacement procedures

Access for percutaneous heart valve replacement, in most cases is through the artery femorale.In some patients, in which the blood vessel is too small to access, can be done only through ' subclavian artery or by transapical.
The second approach requires an incision of about five centimeters on the side of the chest, in this case it is necessary to intervene in a hybrid operating room because if done in a standard environment is necessary to use a mobile X-ray to guide the catheter. For this type of intervention, the system Artis zee ® is able to make measurements with significant dose reduction, and is able to reduce the dose in other ways.
The C-arm of Artis zee can detect images up to 290 ° rotation around the patient's body, with the software syngo ® DynaCT is able to reconstruct three-dimensional images by reducing the radiation dose significantly. This can be done while the patient is on the operating table, with no need 'to travel between image acquisition and installation of the valve. 

Outstanding features Siemens

Dr. Walters notes that Siemens is one of the few suppliers of advanced technology for these needs (only two), and was chosen as a supplier for a number of reasons, was not only includes the cost of the package, but also ' high level of quality, reliability, proven experience, and, equally important, product support ensures that Siemens. Another important aspect in the planning phase was to realize that the equipment supplied is fit for the purposes of future hybrid operating room. At the Prince Charles Hospital has been appreciated the flexibility of the solution because the room is also used for cardiac surgery procedures, vascular and cardiology.
 

Wednesday, September 22, 2010

Hybrid Cars - Technology Of The Future Or Passing Fad?

By Rick Hendershot
Hybrid cars have been getting a lot of buzz the last three or four years, and now with the soaring cost of oil and gasoline, hybrids are expected to get hotter than ever. Here are some Questions and Answers about hybrids.
1. What is a hybrid car?
A vehicle is a hybrid when it combines two or more sources of power. Hybrid cars almost always have a gasoline engine and an auxiliary electric motor system that runs off rechargeable batteries.
We normally assume that the point of hybridization is to save fuel, and that is definitely the case with most of the smaller compacts and sedans. But in fact some of the more upscale hybrid models are more concerned with boosting power and "performance" without the usual loss in fuel efficiency.
2. Do you have to plug your hybrid in at night?
You may assume because a hybrid car runs part of the time off its battery pack, that it is necessary to plug it in at night and recharge the batteries (like a golf cart!). But this is almost never the case. Hybrid cars recharge their batteries "on the fly" by making use of unused energy which is normally wasted during normal driving.
For instance, most have a system that captures some of the energy used while applying the brakes, and converts it to electrical energy to charge the battery. This is called "regenerative braking".
If hybrids had larger battery packs that you could plug into the electricity grid, they would be able to transfer more of the vehicle's power requirements over to the electric motor(s), and use even less gasoline. But most auto makers have been unwilling to go this route, arguing that today's batteries could not take the extra load and more extensive usage.
3. Do you have to replace the batteries?
The short answer is No. Hybrid batteries typically have an 80,000 - 100,000 mile warranty. The U.S. Department of Energy tested them to 160,000 miles and stopped testing because they still performed almost like they were brand new. Some taxi drivers have gone more than 200,000 miles in a Toyota Prius without battery problems.
In any event, since hybrid battery packs have hundreds of cells, individual cells or modules could be replaced if there was a problem.
The best way to keep nickel metal hydride batteries performing at their peak is to keep their charge between 40% and 60% -- never fully charged and never fully drained to zero power.
4. How long have hybrids been around?
Alternatives to the ICE (internal combustion engine) in automobiles have been around since at least 1900. The first patent for a gasoline-electric hybrid vehicle was filed in 1905. Alternative fuel sources were wiped out as a result of two things. First was the development of the electric self-starter (in 1913) that made gasoline driven cars much easier to start.
The second development was the advent of the age of cheap oil that started around the time of the first World War. This completely removed the economic incentive to look for alternative fuel sources. This is only starting to change now, 80 years later.
5. Are hybrids expensive to purchase?
In January, 2006, there were 10 different hybrid models available from $19,000 to $53,000. The most popular models -- the Insight, Civic, and Prius -- are less than $30,000. According to auto maker announcements there should be more than 50 models available by 2010. As sales and production increase the prices should not be significantly more than for standard ICE models.
Even with the slightly higher average cost for a hybrid -- usually around $3,000 -- these additional initial costs can be offset by federal and state tax incentives, lower maintenance costs, and exceptionally strong resale values.
6. Are hybrids small and underpowered?
Initial hybrid models emphasized fuel economy, so were much lighter vehicles, and had smaller engines. The objective was to offset the loss of power in the ICE with additional power from the electric motor. This would result in essentially the same level of power while burning less fuel.
But this principle does not have to result in underpowered vehicles. In fact the Lexus Rx400h and Toyota Highlander Hybrid both have a 270 horsepower power system. And the Lexus GS 450h hybrid sedan is expected to have more than 300 horsepower and go 0-to-60 in less than six seconds. Taking the quest for hybrid power even further, the Toyota Volta concept venicle has a 408 hp power plant.
7. What is the main reason people buy hybrid vehicles?
Saving money on fuel is the first thing most buyers think of. But, in fact, the amount saved on fuel over the life of the vehicle may not equal the extra purchase cost of the hybrid.
There are obviously other factors at play in the gradually building popularity of hybrids. Some people want to make a "green" statement, others simply want to be the first on the block with a new and promising technology.
8. Will hybrid technology save the environment?
There's no doubt about it. Hybrids are becoming more popular. In the past five years hybrid sales in the U.S. have grown 2000 percent. Sales in 2000 were 9,500, and by the end of 2005 had grown to over 200,000.
But even this larger number is just 1.2% of the 17 million new cars sold last year. If every hybrid gave double the current fuel economy, from an average of 20 mpg to, say, 40 mpg, that would save roughly 100,000 gallons of gasoline a day. But that amount pales in comparison to the total daily gasoline consumption in the U.S. -- 400 million gallons! The savings of 100,000 gallons would bring that number all the way down to ... 399,900,000 gallons.
Not very significant. Obviously governments and auto makers will have to start getting very serious about hybrid technology before it will make a significant difference.
9. Does that mean hybrid technology is only a fad?
No it does not. Because the only way towards a sustainable future is to find a combination of fuels that will reduce our almost total dependence on oil. Hydrogen fueled vehicles will be part of that future, as will fuel cells, deisel, and alternative fuels such as ethanol.
But what is almost certain is that every promising solution will involve some kind of hybrid combination of technologies. So today's hybrid vehicles are an important and necessary step towards a much more promising and sustainable future.
About The Author
Rick Hendershot does website promotion. Get 100 Links a Month at [http://www.linknet-promotions.com/linknet-news.com] | California Traffic School - http://www.trafficinteractive.com | Freesms in deutsche handynetze versenden - http://www.sms2website.de

Article Source: http://EzineArticles.com/?expert=Rick_Hendershot

Sunday, September 19, 2010

Hybrid Cars - Fuel Efficient Cars

By Sheeba Joseph
Nowadays we always hear of all things initiating with automobiles getting environment friendly. Hybrid Car is a type of car which runs on the alternative source of energy and gasoline. It is a combination of two types of engines working together namely a standard gas powered engine and an electric motor supported by the rechargeable nickel-metal hydride battery which is charged with electricity.
A perfect solution to the problems like deteriorating environmental conditions and rising oil prices. The increase in consumption of fossil fuels has resulted in the depletion of these reserves on earth. Thus, using hybrid vehicle would at least cut down the consumption to a large extent.
The future hybrid cars are mostly concentrating on the development of the engine and trying to increase its horsepower up to the maximum level. The future models are carefully designed as per the modern requirements.
They are mostly trying to develop the vehicles which are more fuel efficient, powerful, stylish, and better than the conventional sports cars. The models of these cars are remodeled and structured many times before finalizing the structure of the models.
The future hybrid cars once completed, it would be very difficult to select the best variety. It would also lead to an emergence of a new concept i.e. the car racing which is still at a very primitive stage in terms of hybrid cars.
There are various options available online such as Hybrid sports car reviews and mileage counter which can be utilized for selecting the best sports car. Apart from these, there are many varieties of vehicles available such as the cars that are stylish and give you the satisfaction of driving a sports car. These cars are also available in cool designs, stylish classy looks, and advanced engine.
Sheeba Joseph is a great author who provides detailed information about Best Hybrid Cars. Hybrid Cars are one of the preferred cars on the planet. All the information regarding eco friendly cars.

Article Source: http://EzineArticles.com/?expert=Sheeba_Joseph

Saturday, September 18, 2010

Email Tracing - How to Trace Emails Easily

By OJ PaulDo you ever wonder where those spam messages, chain mails, blackmail messages, and other weird emails that fill your inbox are coming from? Whether you use Outlook, Yahoo, Hotmail, or any other account you have, there may be chances that you will receive those anonymous e-mails. There are actually elements to be used when you want to trace emails that seem suspicious, and you can read all about them here.
Make Use of an Email Tracing Tool
Using an email tracer is a good example. This tool scrutinizes the email and the email headers and provides a report containing information about this electronic mail. If the message received is blank but the e-mail address is there, the server of the address can be traced. But then, an email address is easily forged or faked, so there may be instances that the results may not be totally related to the real sender.
Find Out the E-mail Headers
Every electronic mail you receive contains a corresponding Internet header. To trace email that may be doubted as spam, check the headers, which are the lines you will find on top of the message used by the server. Make sure that the header in your e-mail account is enabled so they would show. There may be different ways to enable headers depending on the account.
Be Keen on the Received Headers
The Received header field is the most important area to look out for when you trace email. You will normally find a Received header in this syntax or structure: Received from, by, via, with, ID, for, date-time. There is a possibility that the true sender may have added a false Received header line to list in the given syntax, so just be vigilant on this.
Email Sender's IP Address
The IP Address is a crucial piece of information in your attempt to trace email messages. In the list of values or tokens from the Received header line, be keen on checking the from token because this is where the IP Address is seen.
If you need a helpful guide and assistance in to trace email easily, you can always rely on the tool available at http://www.ip-adress.com/trace_email/. You simply have to copy and paste the e-mail header of a particular message you wish to track. It is indeed a reliable tool that reveals accurate information of the real sender so you can get useful data about this person.

Article Source: http://EzineArticles.com/?expert=OJ_Paul
http://EzineArticles.com/?Email-Tracing---How-to-Trace-Emails-Easily&id=5039708

NI 9227

The NI 9227 C Series current input module was designed to measure 5 Arms nominal and up to 14 A peak on each channel with channel-to-channel isolation.

When used with the NI 9225 high-voltage module, the NI 9227 current module can measure power and energy consumption for applications such as appliance and electronic device test. With up to 50 kS/s per channel simultaneous sampling, you can not only measure and meter current and power but also look at quality factors such as noise, frequency, and harmonics.

Module Kit Contents
NI 9227 module
Screw terminal connectors for signal wire connectivity (qty 4)
Printed manual

Accessories
NI 9971 protective backshell kit (qty 4) - PN 196375-01
NI 9976 spare screw terminal connectors for signal wire connectivity (qty 10) - PN 196739-01

Friday, September 17, 2010

What Are Interest Free Credit Cards

By Joseph Kenny
Credit cards that charge no interest on your purchases or on your balance transfer for a certain period of time are said to be interest free credit cards. This interest free period is for a certain time and limit. This gives you the chance for more shopping around and spending without any tension of being levied any extra amount. Thus you can save a lot on these cards.
At times it is so that the interest you pay would depend entirely on how good or bad you fair in credit ranking. Your annual income and nature of past payments also matter a lot. If you have had a bad credit history then you might have to pay a higher interest as compared to those who have good credit ranking. Thus, by paying off your balance on time or even before the due date you can easily assure the interest free credit card for your good credit ranking. Today all the major credit card companies provide customers with interest free credit cards whether they are Virgin credit card or Egg credit card or even Natwest credit card accompanied with additional offers.
Any interest free credit card can prove very advantageous for you by many means. This option gives you the chance of balance transfer and helps you to pay off your existing outstanding balance of your borrowings without added burden of interest. This card proves to be the handy tool when you are looking forward to a big purchase and want to repay in the easy installments. This card proves to be a boon for you if it is used wisely. Unfortunately the credit card issuers generally hide the actual APR and which comes into picture once the interest free period is over. This proves hard because now you have to pay more than what you may wish to.
Interest free credit cards are a great option for those running into high debts. Since, you can get an opportunity to pay back your debts without mounting any more of them. But do not let the concept of interest free credit cad pile up your debt any further. Within that interest free period you have to repay your outstanding amount within the stipulated period. The best way to find the interest free credit card is to go for a detail market research, seeking all the avenues available for the information and then go for any credit card.
Joseph Kenny is the webmaster of the UK credit card comparison site http://www.creditcards121.com/, where you can find a selection of interest free credit cards. For US visitors there is also the comparison site http://www.credit-cards-info.com/ for all US interest free offers.

Article Source: http://EzineArticles.com/?expert=Joseph_Kenny
http://EzineArticles.com/?What-Are-Interest-Free-Credit-Cards&id=83765

How to Make Money Posting Links on Google

By Court Tuttle

An interesting topic that a lot of people are learning about right now is how to make money by posting links on Google. The basic idea is to get your articles and websites listed in Google's search results so that people can find them. Obviously you can push a ton of traffic to your site this way and if you can do that, you can turn it into dollar bills.
Since I work as a marketing consultant, I'm often teaching people and companies how to make money using the Internet. In the last few months, a few programs have come out that are supposed to teach people how to make money by posting links so I thought I would offer an explanation about what they're teaching.
There are two basic groups that are using this wording to get people to buy their products.
The first group is pitching an educational product that teaches people how to make money by publishing Google-sponsored links. These links are called AdSense and can be placed on any web page that you have ownership of.
The second group is trying to sell a product that simply teaches people how to get their sites listed in Google.
In all reality you actually need to learn both methods to be able to make money by posting links. The reason for this is pretty obvious if you think about it. You need traffic to click on your sponsored links.
What people are doing is creating websites that are designed specifically to provide solid information and because of that, they rank well in Google and get traffic. They then provide Google's sponsored links and get paid for the clicks that their sites generate. This is the real way you can make money by posting links on Google.
There are people that makes thousands and even tens of thousands of dollars per month using this method.
Court teaches people how to make money online at The Keyword Academy.




Article Source: http://EzineArticles.com/?expert=Court_Tuttle

http://EzineArticles.com/?How-to-Make-Money-Posting-Links-on-Google&id=2101250

No Cost" Refinancing Can Be Costly

By Sarah Dinkins
With mortgage rates on a steady fall, homeowners are increasingly refinancing current mortgages. The reason behind the declining mortgage rates is said to be the belief that the Federal Reserve is resisting to hike short-term interest rates this year. The endless flow of refinance applications has completely overwhelmed loan officers and brokers.
Low Rates Boost Refinancing
With refinancing such a rage, it makes you wonder the kind of savings homeowners are managing and the appeal of refinancing in the current situation. Most homeowners seizing the opportunity are switching from thirty-year mortgage to fifteen year mortgage and saving tens of thousands of dollars over the loan duration. Many applicants are surprised to learn that there is no drastic increase in payment, yet the payoff is cut to half while saving thousands of dollars. Those not qualifying for fifteen year mortgages are still refinancing at lower interest rates, choosing to use the bi-weekly payment facility to pay off loans early but still save thousands in interest.
The mortgage amount and the rates of interest determine the extent of savings by homeowners refinancing at lower rates and changing to 15-year plan. A 30-year mortgage for $150,000 with 8 percent interest rate will work out to monthly payments of around $1100 per month and in the course of the loan period the payments add up to almost $250,000 in interest. The same homeowner can take the same mortgage amount over a 15 year mortgage period, refinancing it at 5.5 percent interest rate, with monthly payment of about $1225, just $125 more per month over the thirty year mortgage and complete payment of mortgage in half the time with $175,000 saved in interests. This explains the reason for the increasing number of people approaching lenders for refinancing homes. The larger the mortgage amount and higher the original interest rate, the higher the amount that is saved.
No Cost Has Costs
Taking the big picture into consideration, some no cost refinancing can actually cost quite a lot but the costs are not easily visible. No cost financing mostly requires you to pay up to 5/8 a point more in interest than with a full cost loan. There's no reason for you to apply for these no-cost refinancing advantages if your current interest rate is far lower than the current no cost refinancing rates. This financing option is worth considering in case you plan to be at home only for a period of one to three years.
But if unsure about how long you are going to be home, it still makes sense to go for a no cost loan. If you end up staying home for a long period, you can refinance at a later date. Borrowers contemplating no cost refinancing due to inability to afford refinancing costs, need to try harder. Often refinancing enables rolling costs of refinancing into the loan, making it possible for you to refinance without requiring a large sum of money up front.
But if you decide on no cost refinancing, ensure there are no hidden costs in it. A no cost loan does not require lender fees or settlements, which the lender pays for without affecting the cost of your loan. Nevertheless, there are some lenders that transfer the costs to the borrower by charging higher interest rates. So, make sure to compare different offers before closing any deal.
Sarah Dinkins is an Expert Loan Consultant in the financial industry that helps people to repair their credit and get approved for home loans, unsecured personal loans, student loans, consolidation loans, car loans and other types of loans and financial products. At http://www.badcreditfinancialexperts.com/article/ she is continually adding new finance articles useful for those in need of professional advice.

Article Source: http://EzineArticles.com/?expert=Sarah_Dinkins
http://EzineArticles.com/?No-Cost-Refinancing-Can-Be-Costly&id=367590

Friday, September 3, 2010

How to Choose a Computer Power Supply


 By Matthew Thompson
What does "ATX" stand for? ATX stands for Advanced Technology eXtended. In summary it defines a set of standards in measurements and forms that helps make things such as computer power supplies interchangeable with one another.
ATXPowerSupplies.Com writes this article on choosing the right power supply for your computer to help you in your decision making process. Whether you are purchasing a power supply for your new computer or just replacing an old one we hope this will help in the selection process.

The first question to ask yourself is, "Is my power supply an ATX form factor?". If you have this information available then the selection process is much easier. The information is sometimes stamped somewhere on the power supply or may be contained in the manual for your existing computer. If you're looking for an ATX power supply make sure the power supply is an ATX form factor, not micro ATX or any other.
Perhaps the most method to use in selecting a power supply is comparing the physical dimensions. Make sure your computer case can accommodate the the Height, Width, and Depth of the power supply. If you are replacing an existing power supply then take measurements of it before you discard it. Take a look at the graphic above to gain a better understanding of Height, Width, and Depth. If your power supply is considerable smaller than the typical dimensions of our atx power supplies then it could be possible that you have a micro atx power supplies. If you feel you might have a micro atx power supply then you could compare its dimensions with our 200W micro atx power supply.
After you have chosen your power supply based on physical dimensions you need to take a look at what connectors you need on your power supply. Different power supplies have different connectors so it's best to choose one with connectors that meet your every need. It's okay if you buy a power supply and not use some of the connectors. You can just leave them hanging unconnected. Below is pictures of some common connectors found on atx power supplies:
atx connector
20 pin ATX Connector - The 20 pin ATX connector that inserts into an atx motherboard. If your motherboard has a slot for the 20 pin connector shown in the graphic they you can be almost 100% certain that an ATX power supply is required for your motherboard.
Be sure to pay close attention to the number of pins. On some computers we've found that this connector contains 24 pins instead of 20.
24 pin ATX Connector - Some computer motherboards require a 24 pin ATX Connector. Given our past experience we advise purchasing a power supply with a 24 pin connector built in rather than a converter that converts the 20 pin to a 24 pin. The converters tend to have poor power distribution while a power supply with the 24 pin connector built in will be powered directly from the power supplies.
P4 Connector - Most motherboards that have Intel Pentium 4 processors will have a slot on the board for this P4 connector. If your motherboard has this slot then make sure you get a power supply with a P4 connector on it. If your motherboard doesn't have a slot for this connector it is still okay to purchase a power supply with this connector, and leave the P4 connector unconnected.
4 pin IDE Connector - This is the IDE connector that supplies power to your hard drives and cdroms. Most atx power supplies have 4 connectors of this type included. If you need more than 4 connectors it's best to purchase y-splitters to increase the number of connectors. Purchasing power supplies with more than 4 connectors can often be much more costly than purchasing a y-splitter.
4 pin floppy connector Floppy Connector - The 4 pin floppy connector supplies power to any floppy drives that may be on your computer. Some of the card reader drives use this connection also. Most atx power supplies have two of these connectors included.
6 AUX connector - Look on your motherboard and see if there is a slot that accepts the 6 pin AUX connector. If there is a slot for it then chances are you're going to need it.
Sata connector - Hard drives and other devices with sata connectors as shown here are becoming more and more popular. We aren't sure exactly what the advantages are to this technology, but if you have any devices in your computer that use the sata connector you're going to need a power supply with sata connectors.
You need to know how much power you're going to need. It's okay to buy a power supply that is larger than necessary because the power supply will step down to your power requirements. On the other hand, buying a power supply that is too small for your requirements will be annoying. Many times people will complain of their computer rebooting for no reason at all. Nine times out of ten the reason for this is an undersized power supply. Many companies that sell computers will install an undersized power supply to save money and increase profit margins. Buyer beware!
This article is supplied by ATXPowerSupplies.Com as a complimentary service. It may be reproduced only if credit is given, and all hyperlinks remain intact in the article.
Copyright 2005 Two Point Enterprise
Matthew Thompson, Webmaster

http://www.atxpowersupplies.com

Article Source: http://EzineArticles.com/?expert=Matthew_Thompson

How to Earn Farmville Ribbons


By Garry Booton
Farmville ribbons are awarded to players who manage to carry out a specific task on Farmville. You can just play the game and wait to be awarded a ribbon when you accidently complete task without realising it, but when you earn a ribbon you also earn extra points and Farmville money. So it makes sense to know how to earn Farmville ribbons if you want to help yourself to level up quickly on Farmville.
As you are probably aware to level up quickly on Farmville is the best way to release more crops, animals and other game items for you to access. The more items you can use the better are your chances of becoming a Farmville expert. There are however certain ways to make sure that you are awarded ribbons on Farmville.


High Roller Ribbon
I am going to start with the high roller ribbon as it is the easiest one to earn. You earn this ribbon by earning Farmville coins and the best way to Farmville coins is to make sure your farm is kept full of crops. You earn coins by planting and then harvesting these crops, but the secret is to harvest the more expensive crops as that way you will earn yourself more experience points and it is these points that you need to move up to each level on Farmville.
Local celebrity ribbon

This is another ribbon that is very easy to earn once you start to play Farmville. To earn this all you need to do is to have Farmville neighbours. You can start getting neighbours by clicking on the tab that is labelled "Farmville neighbours", this will show all your friends on face book that play Farmville.
Just add all your friends as Farmville neighbours, but if you only have one or two friends that play Farmville then there is no need to miss out on this ribbon. All you need to do is to register at the Farmville forum where you can ask for Farmville neighbours. I done this when first started playing farmville and within 2 hours I had an extra 28 neighbours who had asked me to become their neighbour on Farmville.
Gifted not spoiled ribbon

This ribbon is easy enough to earn but you do need to have a lot of neighbours so it will be best to follow what I described above first. To earn this ribbon you have to be sent and accept gifts from your neighbours, when receiving gifts you have to remember that you can only have 21 unique gifts in your received box at a time. If you do have duplicate gifts in your box you will have to remove them.
You can use or sell any duplicate gifts that you have received. This ribbon is earned by all the gifts remaining in your received box. So you need to have 21 different gifts rather than having a total of 21 gifts that's made up of having duplicates of the same gift.
By knowing how to earn farmville ribbons you will soon be on your way to becoming a Farmville expert in no time.
To find out even more ways to become a farmville expert quickly you need to Click Here



Article Source: http://EzineArticles.com/?expert=Garry_Booton


http://EzineArticles.com/?How-to-Earn-Farmville-Ribbons&id=3516895

How to Play FarmVille - Beginner's Guide

By Simon Catcheside

If you've just started to play FarmVille or even if you've been playing for some time this guide how to play FarmVille should give you some good advice to get your game going or just to help you progress. I love FarmVille and have done so for some time now. Don't get me wrong I'm no expert and I don't call me a guru, I just love playing FarmVille and would like to share what I have learned with you.

How To Play FarmVille - Background Info

FarmVille started in June '09 by a company called Zynga. It can be played on many platforms including Facebook, FarmVille.com and Zynga's latest release as an iPhone App. FarmVille is growing rapidly, as I write this there are over 70 million active members playing FarmVille worldwide every single month. Thats amazing!

FarmVille isn't just a game, it is a way to connect with other users who have the same interests as you. Contact those friends who you've lost touch with and become FarmVille neighbors. Why not play with other players from around the world who also love FarmVille. Easily find other FarmVille fanatics on Facebook's FarmVille neighbor request page or search Google for FarmVille neighbor forums. There's a ton of them. Learn how to play the game together and help each other if you get stuck.

How To Play FarmVille - Aim of The Game

The aim of FarmVille is to progress through the levels and manage a farm as a farmer would in real life. However, not everything on FarmVille is quite what it seams. In addition to planting and harvesting crops you will be given the opportunity to look after animals, hatch eggs, construct buildings and look after your neighbors crops. To progress levels you will need to earn experience points or FarmVille XP as its called in the game. XP can be earned by completing almost any task on your farm, so progressing to the next level is quite easy within the first few levels. As you progress levels the amount of FarmVille XP needed to level up increases and more tasks need to be completed to progress. As you learn how to play FarmVille the easier it will become to get XP and you'll find out which tasks will earn you the most.

Whilst learning how to play FarmVille you'll find different levels unlock new items for you to use e.g level seven enables you to buy rice while level nine will enable you to buy a wagon and a bike, and so on. As you progress you will then unlock more items to buy, which will make managing your farm easier. Items you can buy include tractors, Combine harvesters and seeders just to mention a few but beware these item also cost FarmVille cash and FarmVille money so watch what you spend your hard earned money on don't leave yourself short.

How To Play FarmVille - Adding New Challenges

FarmVille seems to have an endless amount of levels but truth is Zynga are working on FarmVille constantly, which is good news for you the player. They are adding new challenges and items all the time. At time of writing this they introduced the bee hive which lets you the farmer build a hive with materials donated by your neighbors. It sure gets you hooked! With the aim to have a fully working hive with bees and a queen bee obtained by growing flowers. After you've completed your hive you'll earn more money from your crops and be able to collect honey.

Share items with your neighbors and in turn they'll share items with you. Need an item quickly send it out to your neighbors and if they return the favor they'll send it back to you for your inventory.

As you progress, items in your inventory will mount up (a max of 200 items). Sell whatever you don't need to earn more FarmVille coins, you'll also get extra space to receive more items.

How To Play FarmVille - Forget About The Bells And Whistles

Concentrate on getting levels behind you for the moment and build up your FV coins and FV XP. When you've gained enough, you can then concentrate on the bells and whistles as I like to call it. I am of course, talking about the decorations and aesthetics of your farm. If you buy none essential items to early you'll fall at the first hurdle. If you do this you'll end up doing one of two things, either get bored and give up FarmVille all together or panic and by FV cash and FV XP with real money. I wouldn't recommend this to anyone.

How To Play FarmVille - More Resource's

Want to know how to play FarmVille? Get some useful tips to catapult you ahead of your neighbors? Check out my Farmville Techniques - Four Ways To Succeed article on Squidoo. For useful information to help you master FarmVille go to Five Tips to Master FarmVille. Hope you enjoyed How To Play FarmVille - Beginners Guide. That's all folks!

Article Source: http://EzineArticles.com/?expert=Simon_Catcheside
http://EzineArticles.com/?How-to-Play-FarmVille---Beginners-Guide&id=4725431